Usb Connection - On-Hold Plus OHP 6000 User Manual

OHP 6000 User Manual
Operation (cont'd)
!

USB Connection

Turn the POWER switch on the back of player to the OFF position.
1
Plug the USB cable into the USB port on the back of your player
2
Plug the other end of the cable into the USB port on your computer.
3
Turn the POWER switch to the ON position (LCD will show an icon of a
4
computer and a memory card with the word "READY.")
Locate and select any MP3 or WMA audio file(s) or file(s) created and
5
saved with the MessageStudio software.
Copy the files.
6
Go to "My Computer" and double click on the player (shown as
7
"Removable Media"on your PC.)
Paste the files to the player.
8
Turn the POWER switch on the back of player to the OFF position.
9
Remove the USB cable and turn the player back to the ON position.
10
External Smart Media Flash Card
The player is also equipped with a slot for a Smart Media (SMC) flash
card. Files can be copied to the card by putting it into the unit and
connecting the USB cable to a PC. Alternatley, files can be copied to
the card by connecting a smart media card reader to the PC's USB port
and copying files directly to the card. Note: Turn the players power off
whenever connecting a USB cable or inserting or removing an SMC
card.
Using a Smart Media Flash Card
The player has an SMC card slot located on the right side of the player.
Before inserting the card, power down the unit. Insert the flash card,
gold foil side up, with the notch on the leading edge.
NOTE: When a smart card is inserted, files stored on the on-board
memory canot be played or viewed. Powering down the unit and
removing the card will allow you to playback content stored on the
on-board memory.
6