On-Hold Plus OHP 6000 User Manual page 3

OHP 6000 User Manual
Set-up
Connection to PBX or KEY phone systems
Plug AC adapter into wall outlet.
1
Plug AC adapter cable into jack marked "DC9V".
2
Plug "Connector Cable*" to "AUDIO OUT" jack.
3
Plug other end of "Connector Cable" into phone system's music-on-hold
4
(MOH) input jack. NOTE: If the jack cannot be located, contact your
phone vendor for assistance.
NOTE: Connections to ordinary multi-line analog and KSU-less phones require ues of
model number OHP 6500. For more info on the OHP 6500 and connection to analog and
KSU-less phones, visit our web site at www.onholdplus.com.
* Connector Cables -- Both RCA-to-RCA and and RCA-to-3.5mm mini
connector cables are included. While most all phone systems have an RCA
connection on the PBX or Key System Unit, a few have a 3.5mm mini
connection. If the jack on the phone system does not look the same as the
"AUDIO OUT" jack on the player, use the 3.5mm mini-to-RCA connector cable.
music-on-hold
input
2
PBX or Key
System