Operation - On-Hold Plus OHP 6000 User Manual

OHP 6000 User Manual

Operation

!
Playback
Playing Audio Stored in Memory
By default, the unit is always in "playback" mode. When unit is playing,
the LCD will display a running time.
Playback After Power Loss
If power to the unit is lost, the unit will resume playback as soon as power
is reapplied.
Playback Modes
The player is set to the PLAY mode as a default. You may stop playback by
pressing the PLAY/STOP button. Using the "REPEAT MODE" button, you
can select from one of three modes. The "repeat" icon in the LCD will
show which mode you are in:
Repeat all tracks in order
Repeat all tracks in a random order
S
1 Repeat the current track only
Saving Your Settings
After setting your volume level, repeat function, and if desired a specific
track to playback, press the "PLAY/STOP" button once. Then press the
"PLAY/STOP" again to resume playback. Doing this allows your settings to
be recalled automatically after the unit loses power and then has the
power reapplied.
Copying New Tracks to the Player
Once connected, the player will show up as two removable drives (i.e.
Drive E & Drive F) in the MY COMPUTER window on your PC. The first drive
will represent the on-board memory (8 MB). The second drive represents
the built-in Smart Media Card reader (slot located on right side of unit,
only available if a card is inserted). The MY COMPUTER window is where
you can manage the content on your player. From this window you can
add or delete files that are stored on your player.
5