Output Adjustment; Temperature Adjustment; Bleeding Of The Appliance; Cleaning The Front Of The Appliance - Bosch THERM 1000 O Installation And Use Manual

Fig. 7 Switch off

3.4 Output adjustment

Less hot water.
Decrease output.
Fig. 8
More hot water.
Increase output.
Fig. 9
The output adjustment field is greater than the
one printed on the control panel. This one only
indicates the minimum and maximum direction.

3.5 Temperature adjustment

▶ Turning counter clockwise.
Increases the flow and decreases the temperature
6720643462-07.1V
Fig. 10
▶ Turning clockwise.
Decreases the flow and increases the temperature

3.6 Bleeding of the appliance

If there is a risk of freezing, you need to proceed as follows:
▶ Close the appliance's water shut-off valve.
▶ Open a hot water point.
▶ Loosen the relief screw located in the water inlet tube
(Fig. 11).
▶ Empty all the water contained inside the appliance.
Fig. 11 Relief screw

3.7 Cleaning the front of the appliance

▶ Only clean the front of the appliance with a cloth and some
detergent.
Do not use corrosive and/or abrasive
detergents.
Use | 11
6720643462-11.1V
6 720 818 788 (2015/11)