Table of Contents
Advertisement
Mounting
Orientation
Rigging
Mounting Diagram
B-250 Bubble Machine User Manual Rev. 6
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes section.
The Bubble Machine may be mounted in any position; however, make sure adequate
ventilation is provided around the product.
·
Before deciding on a location for the product, always make sure there is easy
access to the product for maintenance and fluid replenishment purposes.
·
Make sure that the structure or surface onto which you are mounting the product
can support the product's weight. See the Technical Specifications section of this
manual for weight information.
·
When mounting the product overhead, always use a safety cable. Mount the
product securely to a rigging point, whether an elevated platform or a truss.
·
When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has a 13 mm hole, which is appropriate for
this purpose.
·
The bracket adjustment knobs allow for directional adjustment when aiming the
product to the desired angle. Only loosen or tighten the bracket knobs manually.
Using tools could damage the knobs.
Mounting Bracket
Adjustment Knob
Page 7 of 10
Advertisement
Table of Contents
