Software Updating - Pioneer BDP-LX91 Operating Instructions Manual

Problem Check
Noise can be heard when Is the connected AV receiver or amplifier compatible with DTS
outputting DTS Digital Digital Surround?
Surround signals from the
DIGITAL OUT terminals.
192 kHz or 96 kHz digital
audio signals cannot be
output from the DIGITAL
OUT terminals.
Secondary audio or Is HDMI Audio Out properly set?
interactive audio is not
output.
Are Dolby Digital Out and DTS Out properly set?
Sound is fast or slow. When an HDMI cable is connected, are audio signals being
output from devices connected with cables other than HDMI
cables?
After a disc is inserted, Are there too many files recorded on the disc?
Loading stays displayed and
playback does not start.
 is displayed in file names,
etc.
A message indicating low
memory (local storage)
appears while playing a
BD-ROM disc.
The DVD layer of BD and DVD Is Hybrid Disc Playback properly set?
hybrid discs cannot be
played.
Is Hybrid Disc Playback properly set?
The CD layer of BD and CD
hybrid discs cannot be
played.
The BDMV format on BD-R/
-RE discs cannot be played.

Software updating

Problem Check
"Connection to the software
updating server failed" is
displayed when you try to
update the software.
Software updating is slow.
• "WRT NG ****" is displayed
on the front panel display
during software updating.
(**** meaning any
characters)
• "WRT FAILED" is displayed
on the front panel display
during software updating.
Remedy
If an AV receiver or amplifier that is not compatible with DTS
Digital Surround is connected to the DIGITAL OUT terminals,
set DTS Out to DTS  PCM (page 43).
It is not possible to output 192 kHz or 96 kHz digital audio
signals from this player's DIGITAL OUT terminals. The signals
are automatically converted to 48 kHz or less for output.
When listening to the sound from an HDMI OUT (MAIN)
terminal, set HDMI Audio Out to PCM (page 44).
When listening to the sound from an DIGITAL OUT terminal,
set Dolby Digital Out to Dolby Digital 1, DTS Out to DTS 1
(page 43).
When a Pioneer AV receiver or amplifier compatible with the
PQLS function is connected directly to the player's HDMI OUT
(MAIN) terminal using an HDMI cable, the PQLS function is
activated when playing an audio CD (CD-DA). Because of this,
the sound output from components other than the ones
connected by HDMI cable may be fast or slow. If this happens,
set PQLS to Off (page 44).
When a disc on which files are recorded is inserted, depending
on the number of files recorded on the disc, loading may take
several dozen minutes.
The characters that cannot be displayed on this player are
displayed in .
Erase the BDMV data (page 50).
Set Hybrid Disc Playback to DVD (page 44).
Set Hybrid Disc Playback to CD (page 44).
To play the BDMV format on BD-R/-RE discs containing both
BDMV and BDAV formats, set BDMV/BDAV Playback
Priority to BDMV (page 44).
Remedy
Perform Connection Test (page 50). If "Network connection
test completed successfully." is displayed, check the proxy
server settings (page 49). Also there may be a problem with the
Internet connection. Contact your Internet service provider.
Depending on the Internet connection and other conditions,
some time may be required to update the software.
The message is displayed when software updating has failed.
Check again whether it can be updated properly.
07
67
En