Pioneer BDP-LX91 Operating Instructions Manual page 49

 Changing the Country/Area code
Select and set Parental Lock  Country Code  Next
1
Screen.
Use / to select, then press ENTER.
2 Input the password.
Use the number buttons (0 to 9) or / to input the number, then
press ENTER to set.
Use / to move the cursor.
CLEAR
SECONDARY
AUDIO
VIDEO SELECT PLAY MODE
HOME MEDIA
GALLERY
TOP MENU
HOME
MENU
Initial Setup
BD PLAYER
Video Out Country Code
Audio Out
Enter the password
Speakers
HDMI MAIN
HDMI SUB
Playback
Language
Parental Lock
3 Change the country/area code.
Use / to change, then press ENTER to set.
Initial Setup
BD PLAYER
Country Code
Video Out
Audio Out
Code
Speakers
HDMI MAIN
Number
HDMI SUB
Playback
Language
Parental Lock
• The the country/area code can also be changed using the
number buttons. Use / to move the cursor to Number, use
the number buttons (0 to 9) to input the number, then press
ENTER. Refer to Language Code Table and Country/Area Code
Table on page 54.
 Setting the IP address
Select and set Network  IP Configuration  Next Screen.
1
Use / to select, then press ENTER.
ENTER
OUTPUT
RESOLUTION
VIDEO
DISPLAY POPUP MENU
MENU
TOOLS
ENTER
RETURN
2 Set IP address.
Use /// to set the IP address of the player or DNS server,
then press ENTER.
Network
BD PLAYER
IP Address
Auto Set IP Address
IP Address
Subnet Mask
Default Gateway
Auto Set DNS Server Address
DNS Server (Primary)
DNS Server (Secondary)
• Auto Set IP Address
On – The player's IP address is obtained automatically. Select
this when using a broadband router or broadband modem that
has a DHCP (Dynamic Host Configuration Protocol) server
function. This player's IP address will automatically be allocated
from the DHCP server.
Off – The player's IP address must be set manually. Use the
number buttons (0 to 9) to input the IP address, subnet mask
and default gateway.
• Auto Set DNS Server Address
On – The DNS server's IP address is obtained automatically.
Off – The DNS server's IP address must be set manually. Use
the number buttons (0 to 9) to input the DNS server's IP address
stipulated by your Internet service provider.
Note
• When Auto Set IP Address is set to Off, Auto Set DNS Server
Address is also set to Off.
• For information on DHCP server function, refer to the network
device's operating instructions.
• You may need to contact your Internet service provider or
network administrator when inputting the IP address manually.
 Setting the proxy server
Only set the proxy server if so instructed by your Internet service
provider.
Select and set Network  Proxy Server  Next Screen.
1
Use / to select, then press ENTER.
2 Select and set Use or Not use at Proxy Server.
Use / to change, then press .
Network
BD PLAYER
Proxy Server
Proxy Server
Server Select Method
Server Name
Port Number
• Use – Select this when using a proxy server.
• Not use – Select this when not using a proxy server.
If you have selected Use, proceed to step 3.
Off 
Off
Use 
Server Name
06
49
En