Others; Glossary - Pioneer BDP-LX91 Operating Instructions Manual

Others

Problem Check
The player's power turns off Is Auto Power Off set to On?
automatically.
The player's power turns on Is KURO LINK set to On?
or off automatically.
Player cannot be operated Is an AV receiver or amplifier connected to the CONTROL IN
with remote control. terminal on the player's rear panel?
Are you operating the remote control from a point too far away
from the player?
Are the batteries dead?
Input of connected TV, AV Is KURO LINK set to On?
system and HD AV Converter
switches automatically.
Settings you have made have • Have you disconnected the power cord while the player's
been cleared. power was on?
• Has there been a power failure?
"Processing failed." is
displayed.

Glossary

 Aspect ratio
The ratio of a TV screen's width to its height. Conventional TVs have
an aspect ratio of 4:3, while high definition (HD) and widescreen TVs
have an aspect ratio of 16:9.
 Audio language
Multiple audio tracks, for example the original sound and the
dubbed sound, can be recorded on BD-ROM or DVD-Video discs. Up
to 32 languages (32 audio tracks) can be recorded on BD-ROM
discs, up to 8 languages (8 audio tracks) on DVD-Video discs, so you
can select the desired language when viewing the disc.
 AVCHD (Advanced Video Codec High
Definition)
The AVCHD is a high definition (HD) digital video camera recorder
format recording high-definition onto certain media by using highly
efficient codec technologies.
Remedy
If Auto Power Off is set to On, the player's power turns off
automatically if no operation is performed for over 30 minutes
(page 45).
The player's power may turn on and off together with the power
of the TV connected to the HDMI OUT (MAIN) terminal. If you
do not want the player's power to turn on and off when the TV's
power is turned on and off, set KURO LINK to Off (page 44).
Operate with the remote control of the device connected to the
CONTROL IN terminal.
Operate from within 7 m of the remote control sensor.
Replace the batteries (page 6).
The input of the TV, AV system (AV receiver or amplifier, etc.)
and HD AV Converter connected to the HDMI OUT (MAIN)
terminal may automatically switch to the player when playback
starts on the player or the menu screen (Home Media Gallery,
etc.) is displayed. If you do not want the inputs of the
connected TV, AV system (AV receiver or amplifier, etc.) and
HD AV Converter to switch automatically, set KURO LINK to
Off (page 44).
Always press  STANDBY/ON on the player's front panel or
 STANDBY/ON on the remote control and check that
POWER OFF has turned off from the player's front panel
display before disconnecting the power cord. Be particularly
careful when the power cord is connected to the AC outlet on
another device because the player turns off in conjunction with
the device.
If the message appears repeatedly, please ask your nearest
Pioneer authorized service center or your dealer to carry out
repair work.
 BD-J
With BD-ROMs, it is possible to use Java applications to create
highly interactive titles, for example including games.
Java and all Java-based trademarks and logos are trademarks or
registered trademarks of Sun Microsystems, Inc. in the U.S. and other
countries.
 BDAV
Of the BD format, the Audio Visual Format Specifications for HD
digital broadcast recording is referred to as BDAV on this player and
in this operating instructions.
 BDMV
Of the BD format, the Audio Visual Format Specifications designed
for pre-packaged high definition (HD) movie contents is referred to
as BDMV on this player and in this operating instructions.
07
69
En