Speakers; Kensington Lock Latch - NEC VXI Series Service And Reference Manual

Speakers

Follow these steps to remove the speakers.
1. Remove the LCD panel, keyboard, heat plate, top cover, audio board, and I/O board from
the system.
Slide the speaker up and out of the front of the base assembly. There are two speakers.
2.

Kensington Lock Latch

Use the following steps to remove the Kensington lock latch.
Remove the LCD panel, keyboard, heat plate, and top cover from the system.
1.
Locate and remove the two screws securing the lock latch to the main board.
2.
A – Screws
Lift the Kensington lock latch out of the base assembly.
3.
3-20 Disassembly and Reassembly
Removing the speaker
A – Speaker
Removing the lock latch screws
B – Lock Latch