Sharp AL-1633 Operation Manual page 65

5
Remove the new drum cartridge from
the protective bag and gently insert
the lead end of the drum cartridge
along the guides.
Do not touch the drum cartridge (green
portion). Doing so may damage the drum and
Caution
cause smudges on copies.
6
Remove the protective cover from the
drum cartridge and then push the
cartridge all the way into the machine.
1
2
7
Insert the TD cartridge along the
guides until it locks in place.
8
Close the front cover and side cover.
• Before closing the front cover, make sure
Note
that the TD cartridge and drum cartridge is
correctly installed.
• When closing the front cover, gently hold
both ends.
If there is any dirt or dust
on the TD cartridge,
remove it before
installing the cartridge.
The drum cartridge
replacement required
indicator ( ) will go
out.
TROUBLESHOOTING
63
5