Using The Baby Monitor; Setting Up; Pan And Tilt; Night Vision Mode - Motorola MBP43 User Manual

3. Using the Baby Monitor

3.1

Setting up

• Place the baby unit in a convenient location (e.g. on a table) and point
the camera lens towards the area you want to monitor.
• Adjust the baby unit's head angle by using the parent unit to pan and
tilt the camera up, down, left and right until you are satisfied with the
image in the parent unit.
NOTE
Do not place the baby unit within the baby's reach! If there is interference
with the picture or sound, try moving the units to different locations, and
ensure they are not close to other electrical equipment.
3.2

Pan and Tilt

The camera can be remotely controlled from the parent unit when in
normal video mode.
+
1. Press the
<
2. Press the
3.3

Night Vision Mode

The baby unit has 8 high-intensity infrared LEDs for picking up clear images
in the dark. When the built-in photo sensor detects a low level of ambient
light, the LEDs will automatically activate and the screen on the parent unit
will display in black and white. The
3.4

Talk Mode

Press and hold the
through the baby unit's loudspeaker. The
top of the LCD screen.
3.5

Video ON/OFF

V
Press the VIDEO ON/OFF key to turn the LCD display on or off, but
still leave the audio monitor on.
Using the Baby Monitor
-
UP button or DOWN button to tilt upward or downward.
LEFT button or
T
TALK button on the parent unit to talk to your baby
>
RIGHT button to pan left or right.
N
icon will be displayed on the screen.
T
icon will be displayed at the
11