Alarm; Camera Control; Add (Pair) A Camera; View A Camera - Motorola MBP43 User Manual

4.5

Alarm

M
1. Press the
<
2. Press the
+
3. Press the
6h 4h 2h
( , , ). (The default setting is Alarm OFF.)
If an alarm is set, the parent unit will beep for about 45 seconds
after every 6, 4 or 2 hour period, and the alarm icon will flash red.
4.6

Camera Control

4.6.1 Add (pair) a camera

M
1. Press the
<
2. Press the
del/add/view/scan
and the
+
3. Press the
the OK button to confirm.
CAM 1 CAM 2
4. /
DOWN button to select the desired CAM, and press the OK button
to start searching for a camera unit. The green audio level LED will
flash rapidly while searching.
5. Press and hold the PAIR button under the baby unit until the parent
unit finds the camera, beeps and the camera picture appears.
NOTE
A camera can only be registered to one parent unit at a time.

4.6.2 View a camera

M
1. Press the
<
2. Press the
del/add/view/scan
and the
+
3. Press the
the OK button to confirm.
CAM 1 CAM 2
4. /
DOWN button to select desired CAM, and press the OK button to
view the picture from that camera.
TIP
Press OK repeatedly for a quick way to View cameras without the menu.
14
Menu button and the menu bar will pop up.
LEFT button or
-
UP button or
Menu button and the menu bar will pop up.
LEFT button or
menu will pop up.
-
UP button or
CAM 3 CAM 4
/ / will pop up, press the
Menu button and the menu bar will pop up.
LEFT button or
menu pops up.
-
UP button or
CAM 3 CAM 4
/ / will pop up, press the
>
RIGHT button until
DOWN button to select the alarm time
>
RIGHT button until
DOWN button to select
>
RIGHT button until
DOWN button to select
A
is highlighted.
C
is highlighted,
ADD
, and press
+
UP button or
C
is highlighted
VIEW
, and press
+
UP button or
Parent Unit Menu Options
-
-