Flash photography with color filters
Balancing light from the flash using color filters
■
When using SB-900 with a camera equipped with fi lter detection
(such as D3 series, D700, D90)
•
When a color filter is attached to the SB-900 while the camera's white balance
is set to AUTO or FLASH, filter information is automatically transmitted to the
camera, and the camera's optimum white balance is automatically adjusted to
give the correct color temperature.
■
When using SB-900 with a camera not equipped with fi lter
detection (such as D2 series, D200, F6)
•
Set the camera's white balance according to the filter in use.
■
White balance/exposure compensation value depends on
D
camera in use
Camera
Filter
FL-G1
FL-G2
TN-A1
TN-A2
Color fi lters
(RED, BLUE,
YELLOW,
AMBER)
*1 D3 camera with either firmware A or firmware B version 2.00 or later. (kF-10)
*2 D300 camera with either firmware A or firmware B version 1.10 or later.
(kF-10)
*3 Set the camera's white balance and exposure compensation value.
•
For more details on the white balance, see your camera user's manual.
D–36
*1
D3 series
, D700, D300S,
*2
D300
, D90, D7000,
D5100, D5000, D3100,
D3000
Auto, Flash
Auto, Flash
Auto, Flash
Auto, Flash
Auto, Flash, Direct sunlight
D2 series, D200, D100,
D80, D70 series, D60,
D40 series, D1X, D1H
Not compatible
Not compatible
Incandescent
(fi ne tune +3), +1.0 EV
Direct sunlight
(fi ne tune +3), +0.3 EV
Auto, Flash, Direct sunlight
*3
(+0.7 EV
with AMBER)
D1, D50
Not compatible
Not compatible
Not compatible
*3
Not compatible
*3
Auto, Flash, Direct
sunlight (+0.7 EV
with AMBER)
*3