Motorola ASTRO XTS 5000 User Manual page 3

®
™
ASTRO XTS 5000
Digital Portable Radio, Model II
Quick Reference Card
Product Safety and RF Exposure Compliance
Before using this product, read the operating instructions
!
for safe usage contained in the Product Safety and RF
Exposure booklet enclosed with your radio.
a u t i o n
ATTENTION!
This radio is restricted to occupational use only to satisfy FCC RF
energy exposure requirements. Before using this product, read the
RF energy awareness information and operating instructions in the
Product Safety and RF Exposure booklet enclosed with your radio
(Motorola Publication part number 68P81095C98) to ensure
compliance with RF energy exposure limits.
Concentric
Switch
_ _ _ _ _ _
On/Off/
Volume Knob
Top Side
Button
_ _ _ _ _ _ _
Side Button 1
_ _ _ _ _ _ _
Side Button 2
_ _ _ _ _ _ _
PTT Button
Home Button
4-Way
Navigation
Button
Write your radio's programmed features on the dashed lines.
Radio On/Off
1 On – On/Off/Volume knob clockwise.
2 Off – On/Off/Volume knob counterclockwise.
Zones/Channels
1 Zone – Zone switch to desired zone.
2 Channel – Channel switch to desired channel.
Receive/Transmit
1 Radio on and select zone/channel.
16-Position
Select Knob
2 Listen for a transmission.
_ _ _ _ _ _ _
– or –
Top Button
_ _ _ _ _ _ _
Press and hold Volume Set button.
– or –
Press Monitor button and listen for activity.
3-Position
Switch
3 Adjust volume, if necessary.
_ _ _ _ _ _ _
4 Press PTT to transmit; release to receive.
Speaker/Mic
Display Send Emergency Alarm
Radio on and press Emergency button.
Menu Select
Buttons Display shows current zone/channel and
EMERGENCY. Red LED lights; you hear short,
App Button
(TMS Button) medium-pitched tone.
Note: To exit emergency at any time, press
and hold Emergency button.
When acknowledgment is received, you hear
four beeps; alarm ends; radio exits
emergency.
Send Emergency Call
1 Radio on and press Emergency button.
Note: To exit emergency at any time, press
and hold Emergency button.
2 Press and hold PTT. Announce your
emergency into the microphone.
3 Release PTT to end call.
4 Press and hold Emergency button to exit
emergency.
Send Silent Emergency Alarm
1 Radio on and press Emergency button.
Display does not change; you see no LED;
you hear no tone.
Note: To exit emergency at any time, press
and hold Emergency button.
2 Silent emergency continues until you:
• Press and hold Emergency button to exit
emergency state.
– or –
• Press and release PTT to exit silent
emergency and enter regular emergency
(alarm, call, or alarm with call).