Showing A Single Message In Detail; Tmc Settings - Navigon 14 series User Manual

User's manual NAVIGON 14xx | 24xx
8 This symbol appears only when the reported obstruction affects your
route. Here you see how the obstruction is treated:
(Detour): An alternative route avoiding the traffic obstruction is
calculated.
(Ignore): This obstruction is ignored.
(Automatically): You leave it to the navigation system to decide
whether to calculate an alternative route or not.
►
9 (Show on Map): This button is only available if at least one of the
indicated messages concerns your route. Tap on this button in order to
open the P
8.11.3

Showing a single message in detail

Tap on a message to display this information in detail.
►
The NAVIGON 24xx announces the traffic message in question if the
detail view is open. The announcement of traffic messages is not
possible in every language however.
Tap on the
►
concerned on the map.
8.11.4

TMC Settings

In the T
►
In the TMC S
configure whether the reception of a traffic message concerning your
route should affect your route planning and if so how.
Tuning Mode
Tap on Tuning Mode and select a method for selecting the TMC radio
station.
Automatic: Use the arrow buttons in the station section to tune into
►
another station. The system will search for another station if
reception becomes poor.
Hold station: Use the arrow buttons in the station section to tune
►
into another station. The system will search for the same station on
a different frequency if the signal becomes poor.
- 70 -
Tap on the button to select the next alternative setting.
TMC window. (Refer to "Preview TMC" on page 67)
REVIEW
(Show on Map) button in order to view the section
I
RAFFIC NFORMATION
window you can set the TMC traffic station and
ETTINGS
window tap on Settings.
Useful functions