Table of Contents
Advertisement
Tap on
►
quit Destination search mode. You will be returned to the window
from which you started this mode.
8
Useful functions
8.1
Route profiles
Route profiles define the characteristics and special aspects of the
different modes of transport which are to be taken into account when
calculating routes. For example a route profile for bicycles will exclude
motorways from the route calculation but will include roads which other
vehicles are not allowed to use. And different arrival times will be
calculated for a bicycle than for a motorcycle for example.
8.1.1
Route profile settings
A route profile is made up of several settings:
Speed Profile: defines the mode of transport (e.g. Bicycle, Car, ...)
►
Type of Route: defines the type of route which is to be calculated
►
(e.g. Short Route, Fast Route, ...)
Motorways, Ferries, Restricted Areas: defines whether these types
►
of road are allowed to be used
Use of toll roads: defines whether toll roads are allowed to be used
►
when calculating the route
►
►
For each setting there is a
will see an exact definition of the setting in question.
The number of possible settings depends on the selected speed profile.
For example, for the Bicycle speed profile there are no Motorways and
Use of toll roads settings.
8.1.2
NAVIGON basic profiles
A basic profile is already defined for each speed profile.
Useful functions
(Destination search) or on
Tap on the
(Edit) button.
The U
SE OF TOLL ROADS
Adapt the individual settings to your requirements (Yes, No, Ask
before). (Refer also to Configuring the NAVIGON Primo on
page 56)
If you activate the Ask before setting, every time your route can
take a toll road you will be prompted to make the corresponding
setting(s).
User's manual NAVIGON Primo
window opens.
(Help) button. When you tap on it you
(Back) in order to
- 49 -
Advertisement
Table of Contents
