DigiDesign Mbox 2 Pro Getting Started Manual page 55

Choose 16 for the Resolution and 44100 for
6
the Sample Rate.
If you are changing the sample rate of the
7
bounced file, choose a Conversion Quality set-
ting. (For details, see the Pro Tools Reference
Guide.)
Choose "Convert after Bounce," and click
8
Bounce.
Bounce options for creating CD burnable tracks
In the Bounce dialog, give the bounce tracks a
9
name and choose where they should be saved.
Entering a name for the bounced file
Click Save.
10
Pro Tools begins bouncing to disk. Pro Tools
bounces are done in real time, so you hear audio
playback of your mix during the bounce process
(though you cannot adjust it).
.
Bouncing to Disk dialog
Burning a CD
After the bounce is completed, you will have an
audio file that is ready for burning onto a CD.
Quit Pro Tools and launch any common CD
burning application to burn your bounced mix
to CD.
Make certain that you configure your CD
burning application to create an audio CD
rather than a data CD.
Chapter 7: Common Tasks with Pro Tools LE 47