DFI SB601-C User Manual page 36

2
Hardware Installation
Important:
By default, the PS/2 port supports PS/2 keyboard only. If you intend to
connect a PS/2 mouse, you must set JP3 to 2-3 On. This will support
the auto-swap function allowing the system to auto-detect the PS/2 de-
vice.
To allow the system to detect devices that may be incorrectly plugged to
the wrong port on the cable, set JP3 to 2-3 On. Setting JP3 to 2-3 On
will enable the auto-swap function allowing you to use the devices with-
out having to replug the devices.
PS/2 keyboard port
PS/2 mouse port
36
Connect to the
board's PS/2 port