Internal I/O Connectors; S/Pdif Connector - DFI COM331-B User Manual

I/O Connectors

S/PDIF Connector

1
+5V
Key
Ground
SPDIF out
The S/PDIF connector is used to connect external S/PDIF ports. Your S/PDIF
ports may be mounted on a card-edge bracket. Install the card-edge bracket to
an available slot at the rear of the system chassis then connect the audio cable
to the S/PDIF connector. Make sure pin 1 of the audio cable is aligned with pin 1
of the connector.
5
SPDIF in
Hardware Installation
2
31