Oce im2330 / im2830 Operator's Manual page 238

7.PRINTING STORED DOCUMENT (Cont.)
4
Press the [PRINT] button.
- Printing the set page starts.
When you want to stop the print of the stored document during the
operation, select the job you want to stop from the PRINT JOB
screen or SCAN JOB screen and then press the [DELETE] button.
For details, see the JOB STATUS.
"Deleting a Job"
"7.CONFIRMING THE STATUS OF SCAN"
Printing the Stored Document with Added/Changed Settings
The following settings can be added (or changed) to the stored document in the filing box.
1: Setting the feeding source (Press the cassette area of the feeding source)
2: Setting the number of printing (Key in by the digital key)
3: Setting single-side printing/duplex printing.
4: Setting the finishing mode setting (Selection of the mode is limited depending on the installed option
equipment)
5: Setting the paper exit (Can be set when an optional finisher is installed.)
6: Setting the image shift position
7: Setting the added date and time position
8: Setting of page number position
10
1
Perform steps 1 to 4 of the "Print the
whole Document".
234
10.e-FILING
Page 189
1
2
Page 199
3 4
5
6
7
8