Cd Mechanism Section - Sharp MD-MX30 Service Manual

MD-MX30/MX30W

CD MECHANISM SECTION

For details about the procedure to remove the CD mechanism
from the main unit, refer to Disassembly Procedure, Steps 1-
4 ,7 and 11-13 in the main unit and also the CD section.
(p.10,11).
How to remove the optical pickup
(See Fig. 14-1.)
1. Remove the screws (A1)x 2 pcs., to remove shaft (A2)x 1
pc.
2. Remove the stop washer (A3)x 1 pc., to remove the gear
(A4)x 1 pc.
3. Remove the optical pickup.
Note:
After disconnecting the optical pickup connector wrap the
front end of connector in conductive aluminium foil to
prevent damage to the optical pickup by static electricity.
How to remove the CD loading motor
(See Fig. 14-2.)
1. Remove the belt (B1)x 1 pc.
2. Remove the screws (B2)x 2 pcs.,and remove the Loading
motor.
How to remove the disc tray
(See Fig. 14-3/4 .)
1. Rotate the disc tray gear in the direction of the arrow (1). Pull
out the disc tray as shown by the arrow (2).
2. Press the right and left claws as shown by the arrow (3) to
remove the disc tray.
Optical Pickup
Shaft
( A2 ) x1
Belt
(B1) x 1
Disc Tray Gear
1
2
– 14 –
( A1 ) x2
ø2.6 x 6 mm
CD Mechanism
Stop Washer
( A3 ) x1
Gear
( A4 ) x1
Figure 14-1
(B2) x 2
ø2 x 4mm
CD Unit
CD Roading Motor
Figure 14-2
Figure 14-3
claws
3
3
Figure 14-4