Software Setup; Hardware; Playback - Numark NS6 Reference Manual

SOFTWARE SETUP

The Setup screen has controls to personalize and maintain your Serato ITCH system. Click the "Setup" button to enter the Setup
screen. From here, you can click to enter any of the following tabs: Hardware, Playback, Library, Display or Mixer.
SOFTWARE VERSION & UPDATES: The version of Serato ITCH software is displayed in the bottom left corner of the Setup screen.
The Check for Updates button will open http://www.serato.com in your web browser to tell you if there are available updates for your
version of the ITCH software.

HARDWARE

Firmware Status / Updater:
computer and your computer is online, this window indicates whether or
not your firmware is current. If there is an available update, you will be
able to click the "Update Firmware" button to update it.
UPDATING THE FIRMWARE section for more information.)
USB Buffer Size (Latency): Adjust this virtual fader to set the buffer
size of the USB connection between the hardware (NS6) and the
software (Serato ITCH). If you are using a slower computer, increase
the buffer size. At a larger buffer size, you should no longer experience
any problems with your audio, but there may be a slight delay when the
software responds to the hardware.
Platter Speed: Changes the speed of the Virtual Decks between
33RPM and 45PM.

PLAYBACK

GENERAL:
Playback Keys Use Shift: When checked, all Cue Point, Loop, and
Playback keys on the computer keyboard require Shift or Caps Lock to
function.
Lock Playing Deck: When checked, you can only load a track to a
Deck if it is paused.
Hi-Fi Resampler: When checked, this significantly reduces digital
distortion at very slow or very fast record speeds (which will slightly
increase the CPU load). This option is off by default.
Use auto gain: When checked, you can set the maximum amount of
gain a track will have during playback. If a loaded track's gain is lower
than this setting, its gain will be automatically boosted (its loudest point will match the auto gain level). Auto gain is applied only to
tracks that have been analyzed.
Enable Beat Grid: When checked, all Beat Grid functions are available. Uncheck this box if you do not want to use Beat Grid.
ON SONG LOAD: These options affect the state of tracks when first loaded to the Deck.
Play from Start: When checked, a newly loaded track will start from the beginning. If this box is unchecked, a newly loaded track
will start from wherever the Audio Pointer was located in the previously loaded track.
Play from First Cue Point: When checked, all tracks will start from their first Cue Point when loaded.
BRAKING: This knob controls the speed at which playback will stop when you pause a track. At the minimum (leftmost) value,
playback will stop immediately. At the maximum (rightmost) value, the track will slow down before coming to a complete stop,
simulating the sound of a turntable slowing down once the platter's motor stops.
RECORDING:
Bit Depth: Select the recording bit depth as 16-bit or 24-bit.
File Format: Select the file format you want your audio recordings to be saved as – Wave (.WAV) or AIFF (.AIF).
When the NS6 is connected to your
(See the
12