Miele W 502 Operating Instructions Manual page 36

36
The four feet are not
resting evenly on the
floor.
The spin speed selected
was too low.
These do not indicate a
fault.
The water supply
pressure is too low.
Washing powder used
with water softener
tends to become sticky.
The siphon is either
incorrectly positioned or
clogged.
§
Level the machine. See
advice on installation.
Select a higher spin speed
next time.
They occur at the end of a
pump sequence as a
normal part of the operation.
– Clean the filter in the
water inlet system.
– It may be useful to press
the Water plus button.
Pour washing powder into
the dispenser before adding
any water softener.
Clean the siphon, see
"Cleaning and care -
Cleaning the detergent
drawer".