Magic Install Supports Windows 9X/Nt/2K/Xp - JETWAY V400DB User Manual

Check your package and there is A MAGIC INSTALL CD included. This CD consists of all
DRIVERS you need and some free application programs and utility programs. In addition, this
CD also include an auto detect software which can tell you which hardware is installed, and
which DRIVERS needed so that your system can function properly. We call this auto detect
software MAGIC INSTALL.

MAGIC INSTALL supports WINDOWS 9X/NT/2K/XP

Insert CD into your CD-ROM drive and the MAGIC INSTALL Menu should appear as below.
If the menu does not appear, double-click MY COMPUTER / double-click CD-ROM drive or
click START / click RUN / type X:\SETUP.EXE (assuming X is your CD-ROM drive).
From MAGIC INSTALL MENU you may make 10 selections:
1. VIA 4 IN 1
2. SOUND
3. LAN
4. USB2.0
5. DIRECTX8
6. PC-CILLIN
7. PC-HEALTH
8. MAGIC BIOS
9. BROWSE CD
10. EXIT
4-1 VIA 4 IN 1 Install VIA Service Pack 4 IN 1 Driver
* The path of the file is X:\VIA\DRIVER\SETUP.EXE
IDE :
VIA ATAPI VENDOR SUPPORT DRIVER IS USED TO FIXED COMPATIBILITY
ISSUE FOR IDE DEVICES
install VIA Service Pack 4 IN 1 driver
install AC97 Audio Codec Installing driver
install VIA LAN Controller driver (for V400DBL/V400ADBL)
install USB 2.0 driver
install Microsoft DirectX 8.1 driver
install PC-CILLIN2002 anti-virus program
install Winbond PC-HEALTH hardware monitor Software
install BIOS Live Update Utility
to browse the contents of the CD
to exit from MAGIC INSTALL menu
36