Final Installation; Performance Checklist - Viking VCSB5421 Installation Manual

Final Installation

28
Replace top air grille.
30
Replace the center grille louver.
32
Press "ACTIVATE CONTROLS" pad and close door.
NOTE: There is a 6 minute delay before the unit starts.
34
29
Using an 8" magnetic nut driver, replace
the two 1/4" screws.
31
Open door. Display should flash.

Performance Checklist

□ Align/square door(s).
□ Verify cabinet size.
□ Verify electrical supply and water supply □ Verify drain pan is properly installed and
(if applicable).
□ Install kickplate.
□ Install anti-tip device(s) and verify unit is
secure.
□ Remove internal packaging and labels
□ Position unit in cutout, level at desired
height and secure unit.
□ Plug-in unit and verify operation.
Installer's information:
□ Connect water supply (if applicable).
Installer's name:
• Verify icemaker fill tube is properly
inserted.
Installer's company:
• Verify icemaker bail arm is down.
• Verify dispenser operation
Date:
(if applicable).
no leaks on water connection.
and wipe unit down.
_____________________________
_________________________
________________________________________
35