Kickplate Installation; Door Stop Adjustment - Viking VCSB5421 Installation Manual

15
Lift unit off rollers to desired height and level unit
using a 5/16" head wrench.
NOTE: DO NOT use an electric device. Overtightening
can cause damage.
17
Verify that drain pan is installed and aligned.

Kickplate Installation

18
Align holes on both ends of louvered panels and insert
screws.
30
16
Screw
Wall
2 x 4
Refrigerator
Attach positive secure self-tapping bolts to 2x4
using a 22" extension.
19
Using a Phillips screwdriver, attach the
kickplate to the unit and adjust to desired height.

Door Stop Adjustment

(Side-by-Side)
20
2
Open refrigerator door so door stop and shoulder
screw are accessible.
NOTE: Shoulder screw should be in 110˚ door opening
position.
Door Stop Adjustment
(Bottom-Mount)
22
2
Open refrigerator door so door stop and
shoulder screw are accessible.
NOTE: Shoulder screw should be in 110˚ door opening position.
31
21
90˚
110˚
120˚
2
Remove shoulder screw and place in 90° or
120° position.
23
120˚ 120˚ 120˚
110˚ 110˚ 110˚
90˚
2
Remove shoulder screw and place in
90˚ or 120˚ position.