Kogan KAACTCSACCA Quick Start Manual

Elite Mounting Kit for Smartphone Action Cases
With the Elite Mounting Kit, you can now take your smartphone to even more places. The kit allows you to
securely attach your smartphone Kogan Action Case to your helmet, surfboard, skateboard, snowboard,
bicycle, motorbike and more so you never miss a moment.
Product Checklist
The following items are included:
- Curved Surface Mount w/ 3M Sticker Pad (x4)
- Flat Surface Mount w/ 3M Sticker Pad
- Handlebar Mount
- Adapter
- Screws
- Washers
- 1 x Allen Key
Getting Started
Using the Flat Surface Mount
1. Firstly, prepare the surface you wish to use with the Flat Surface Mount by wiping it clean and then
drying it thoroughly.
2. Take the Flat Surface 3M Sticker Pad and peel one side. Place the now-revealed adhesive surface
upon the Flat Surface Mount in the corresponding manner. (i.e. see above. The sticker and the
mount should align perfectly)
3. Next, peel the remaining side of the flat surface 3M Sticker Pad, leaving the Flat Surface Mount with
an adhesive base. This will allow you to fasten the Flat Surface Mount to a surface of your choice.
4. Having secured the Flat Surface Mount, you are now ready to attach your Smart Phone Action case.
Simply align the corresponding segments of the objects and mesh the two objects together. Secure
the Smart Phone Action case to the Flat Surface Mount using the screws and tools provided.
NOTE: You do not require the use of the Adapter or Handlebar Mount to use the Flat Surface Mount with
your Smart Phone Action case.
Quick Start Guide
KAACTCSACCA