Yamaha CRW2200S Series Owner's Manual page 46

Cd-r/rw drive

Hide thumbs Also See for CRW2200S Series:

Table of Contents

E-IDE (ATAPI) Connection Set Up

Notes

• When replacing an IDE-type hardware solely to a IDE cable, select master for the drive,

and connect it at the end of the cable.

• When the operating system starts with the SCSI hard drive, a primary IDE connector may

have no IDE devices. In such a case, Yamaha recommends you connect the CRW2200E

as a primary master.

• When you connect the removed IDE-type hardware to the other connector of the cable,

some cables may have only one connector. In such a case, use the cable with two

connectors.

Table of Contents