Installing The Software; Installing The Mouse - Lenovo Combined User Manual

Installing the software

It is recommended that you install the Lenovo Mouse Suite software to customize advanced settings before
you use the ThinkPad Precision Wireless Mouse.
Note: It is recommended that you uninstall any previously installed mouse software before installing the
Lenovo Mouse Suite software.
To install the Lenovo Mouse Suite software, do the following:
Note: If you are using the Windows 7, Windows 8, or Windows 8.1 operating system, and your computer is
connected to the Internet, when you connect the ThinkPad Precision Wireless Mouse to your computer for
the first time, a message will be displayed, asking if you want to install the Lenovo Mouse Suite software.
Click Download Now and the Lenovo Mouse Suite software will be automatically installed. If the message is
not displayed, manually install the Lenovo Mouse Suite software by performing the following procedure.
1. Go to http://support.lenovo.com/mousesuite.
2. Locate and download the installation file of the Lenovo Mouse Suite software.
3. Double-click the installation file, and then follow the instructions on the screen to complete the
installation.
Note: In the Hardware Interface Selection window, select USB (Universal Serial Bus) Interface.

Installing the mouse

This topic provides instructions on how to install the ThinkPad Precision Wireless Mouse.
To install the mouse, do the following:
1. Remove the battery compartment cover by lifting the plastic tab.
Figure 11. Removing the battery compartment cover
2. Take out the Lenovo USB Receiver.
Figure 12. Taking out the Lenovo USB Receiver
22
Lenovo Combined Mouse User Guide