Cisco Edge 340 Series Installation Manual page 9

Table of Contents

Advertisement

To prevent the system from overheating, do not operate it in an area that exceeds the maximum
Warning
recommended ambient temperature of:
113°F (45°C) Statement 1047
Installation of the equipment must comply with local and national electrical codes. Statement 1074
Warning
To prevent airflow restriction, allow clearance around the ventilation openings to be at least:
Warning
3 inches (7.6 cm) Statement 1076
Be aware of the size and weight of the Cisco Edge 340 Series when mounting. Ensure that the mounting
Caution
location has a stable flat surface and can safely support the weight of the Cisco Edge 340 Series.
Installing the Cisco Edge 340 Series on a Wall, Pole, or Ceiling
Warning
Read the wall-mounting instructions carefully before beginning installation. Failure to use the
correct hardware or to follow the correct procedures could result in a hazardous situation to people
and damage to the system. Statement 378
You can use the wall-mount kit to mount the Cisco Edge 340 Series to:
For more information and detailed installation procedures, see
and Ceiling Mount) for Cisco Edge 340
Install the Cisco Edge 340 Series on a Flat-Panel Display
You can use your display-mounting kit to install a Cisco Edge 340 to almost any VESA-compliant
flat-panel display that is attached to a third-party VESA bracket. You can mount your Cisco Edge 340
Series above or below the flat-panel display, whether the display is oriented in landscape mode
(horizontal) or portrait mode (vertical).
See the manufacturer documentation pertaining to your display to learn if its casing is VESA compliant
Note
and, if it is, where you can obtain a compatible VESA bracket for it. Cisco does not sell VESA brackets
or kits.
The LCD-mount plates for this product might not be long enough to mount your mounting kit to an
extremely large flat-panel display even if that display is VESA compliant.
For more information and detailed installation procedures, see
Mount) for Cisco Edge 340
OL-29523-01
A wall or pillar (concrete, plaster, or drywall)
A suspended grid ceiling T-joint
A metal pole
Series.
Mounting the Kit Assembly (Wall, Pole,
Series.
Mounting the Kit Assembly (Display
Cisco Edge 340 Series Installation Guide
Installing the Cisco Edge 340 Series
9

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents