8 Adjust settings
You can customise various kinds of settings as
you prefer. Refer to the following instructions to
navigate through the setup menus.
Symbol
Note
•
If the setup option is greyed out, it means the
setting cannot be changed in the current state.
General setup
General Setup
1
Press
SETUP .
» [General Setup] menu is displayed.
2
Press .
3
Select an option, then press OK .
Options
[General Setup]
[Audio Setup]
[Video Setup]
[Preferences]
4
Select a setting, then press OK .
•
To return to the previous menu,
press
BACK .
•
To exit the menu, press
Note
•
See the explanations of the above options in
the following pages.
[EasyLink Setup]
If this Home Theatre System is connected
to HDMI CEC compliant TV/devices, all
connected devices can respond to the
following commands simultaneously:
Option
Description
[EasyLink] Turns off or on all EasyLink features.
To disable this feature, select [Off] .
[One
When you press PLAY , the TV and
Touch
Home Theatre System are turned
Play]
on. Disc play starts if there is a disc
in the Home Theatre System.
To disable this feature, select [Off] .
[One
When you press and hold
Touch
STANDBY for at least three
Standby]
seconds, the Home Theatre
System and all the HDMI CEC
devices switch to standby
simultaneously.
To disable this feature, select [Off] .
[System
When you play audio that is
Audio
routed from the connected
Control]
devices, this Home Theatre System
switches to the corresponding
audio source automatically.
To enable this feature, select [On] .
Then proceed to [Audio Input
Mapping] to scan and map all the
connected devices.
[Audio
When you map the audio input
Input
correctly, this Home Theatre
Mapping]
System switches to the audio from
the played device automatically.
SETUP .
EN
29