Operation; Using The Menu; Changing The Operating Language - Hama 95222 Operating Instructions Manual

Operation

Using the menu

GB
The device is equipped with a user-friendly menu. The menu appears
on the screen.
You open the main menu using the "MENU" button. In the menu, use
the "▲▼" buttons to move around, and select the desired function.
When you confi rm your selection by pressing "OK", a corresponding
submenu appears. Use the "►" button to go to the submenu. Again,
use the "▲" or the "▼" button to move around, and select the desired
line. The selected line is highlighted in colour.
Confi rm your selection using the "OK" button. Usually, an additional
menu will then appear, in which you move around using the "◄►▼▲"
buttons and select the desired setting.
Use "Exit" to exit the current menu level.
For orientation purposes, the menu structure is also included in the
Appendix.
You can control the device using the buttons on the rear or with the
included remote control.

Changing the operating language

The operating language is set to German at the factory. To change this
setting, proceed as follows:
 Press the "System Setting" button on the remote control. . .
 Select "System Setting" and confi rm by pressing the "OK" button.
 Select "Language Setup" – "OSD" and then the desired operating
 Exit the menu by pressing the "Exit" button on the remote control.
48
language, and confi rm your selection by pressing the "OK"
button.
DPF DVB-T