Product Hardware Features; Led; Wps Button - TRENDnet TEW-648UBM User Manual

TRENDnet User's Guide

Product Hardware Features

LED

LED Status Description
Slow Blink When the LED is blinking, the wireless adapter is
transmitting or receiving data.
(1 blink/second)
Fast Blink After pressing the WPS button, the LED will flash 3
blinks/second.
(3 blinks/second)
established between the AP and the adapter, the LED will
remain solid for 5 seconds to tell the users that the
connection has been established. After 5 seconds, the LED
will turn off to indicate that the AP is ready for a new WPS
connection and the adapter is associated with the AP.
Off User inserts the card into the NB without driver installed,
and without connection.
© Copyright 2013 TRENDnet. All Rights Reserved.
Once the connection is successfully

WPS Button

Press the WPS button start the WPS pairing, the LED will begins to blinking for 3
blinks/second, once the connection is successfully established between the AP and the
adapter, the LED will remain in solid for 5 seconds to tell the users that the connection
has been established. After 5 second, the LED will light off to indicate user that the
Access Point or Wireless Router is ready for a new WPS connection and the adapter is
associated with the Access Point or Wireless Router.
TEW-648UBM
2