TRENDnet User's Guide
Product Hardware Features
•
USB Connector – The USB 2.0 Type A connector connects your adapter to one of
the available USB 2.0 Type A ports on your computer.
•
WPS (Wi-Fi Protected Setup) Button / Activity LED Indicator – Push and hold the
WPS button for 3 seconds to activate WPS. The LED will blink rapidly to indicate
WPS has been activated. The LED will blink every 5 sec. when disconnected. When
connected, the LED will blink rapidly during wireless data transmission.
System Requirements
•
Windows® 8 (32/64-bit), 7 (32/64-bit), Vista (32-bit), or XP (32/64-bit)
•
Mac OS® 10.4 - 10.8
•
Available USB 2.0/3.0 Type A port on your computer.
Note: Connecting the wireless adapter USB 1.1 Type A port will limit the speed
capabilities of the wireless adapter. Please ensure to connect the adapter to at
least USB 2.0 Type A port.
•
CD-ROM Drive (Utility and Driver Installation with included CD)
© Copyright 2013 TRENDnet. All Rights Reserved.
USB 2.0
Connector
WPS Button /
Activity LED Indicator
Application Diagram
The AC600 Dual Wireless USB Adapter is installed on a laptop in another room
connecting wirelessly to a router which is connected to the ISP modem (Internet)
allowing the laptop to connect to your network and access the Internet.
TEW-804UB
2