Replacing The Light Bulbs; Refrigerator Lights - GE GDL22KCWSS Owner's Manual And Installation Instructions

Replacing the light bulbs.

Turning the control to the 0 (off) position does not remove power to the light circuit.
Appearance may vary

Refrigerator Lights

CAUTION:
Light bulbs may be hot.
Unplug the refrigerator.
The bulbs are located at the top of the
refrigerator compartment behind the
controls. To remove the light shield,
grasp the shield at the back and pull
out to release the tabs at the back.
Rotate the shield down and then
forward to release the tabs at the front
of the shield.
Freezer Light
CAUTION:
Light bulbs may be hot.
Unplug the refrigerator.
The bulb is located at the top of the
freezer inside a light shield. To remove
the shield, grasp the shield at the back
and pull out to release the tabs at the
back.
Rotate the shield down and then
forward to release the tabs at the front
of the shield.
After replacing with an appliance bulb
of the same or lower wattage, replace
the shield.
Plug the refrigerator back in.
After replacing with an appliance bulb
of the same or lower wattage, replace
the shield.
Plug the refrigerator back in.
ge.com
15