Usb And Sd/Sdhc/Mmc Mode; Playing The Contents Of An Mp3 Player Or A Usb Memory Stick; Playing The Contents Of An Sd/Sdhc/ Mmc Memory Card - Grundig UMS 4950 iP User Manual

USB AND SD/SDHC/MMC MODE

For MP3/WMA mode with MP3 player, USB
memory stick or SD/SDHC/MMC memory card,
the same playback and search functions are avail-
able as for CD mode (see CD Mode section).
Playing the contents of an MP3
player or a USB memory stick
1
Switch off the hi-fi system with »
2
Connect the USB interface of the MP3 player
to the »USB« socket on the hi-fi system (under
the front flap), using a standard USB cable;
or
insert the USB plug of the USB memory stick
in the »USB« socket (under the front flap) on
the hi-fi system.
3
Switch on the hi-fi system with »
4
Press repeatedly on the Jog-Shuttle to select
»MODE« on the hi-fi system.
Select the input source »USB« by turning the
Jog-Shuttle and confirm with » «;
or
press »M« on the remote control repeatedly
until »USB« is displayed.
– Display: »USB«; the hi-fi system scans the
contents of the USB, »READING« flashes;
– Playing time, file number and total file
number appears in the display.
– If there is no USB memory stick inserted,
»NO USB« appears in the display after a
short time.
5 Press » « to start playback with the first file of
the first album.
– Display: elapsed playing time and informa-
tion of the file appears in the display.
6
Press » « to stop playback.
7
Notes:
The USB socket on the hi-fi system does not
7
support a connection for a USB extension
cable and is not designed for directly con-
necting to a computer.
The USB socket of this device is a standard
7
socket. Due to rapid developments in tech-
nology and new manufacturers appearing
every day, the compatibility of USB memory
sticks can only be partially guaranteed.
24
ENGLISH
Playing the contents of an SD/
SDHC/MMC memory card
1 Switch off the hi-fi system with »
2 Insert the card carefully with its label side fac-
ing upwards and gold contacts first into the
»SD« card slot on the hi-fi system (under the
front flap) until it latches into place.
8 «.
3
Switch on the hi-fi system with »
4
Press repeatedly on the Jog-Shuttle to select
»MODE« on the hi-fi system.
Select the input source »SD« by turning the
Jog-Shuttle and confirm with » «;
or
press »M« on the remote control repeatedly
until »SD« is displayed.
8 «.
– Display: »SD«; the hi-fi system scans the
– If there is no memory card inserted, »NO SD«
5
Press » « to start playback with the first file of
the first album.
– Display: elapsed playing time and informa-
6
Press »
Notes:
7
7
7
7
--------------------------------------------
contents of the card, »READING« flashes;
playing time, file number and total file
number appears in the display.
appears in the display after a short time.
tion of the file appears in the display.
« to stop playback.
7
If USB operation is impaired or is not pos-
sible, this does not indicate a malfunction of
the hi-fi system.
Bi–directional data transfer as defined for
ITE devices in EN 55022/EN 555024 is
not possible.
USB transfer is not in itself an operating
mode. It is only an additional function.
Never remove memory cards and USB de-
vices during operation. This can damage
the memory card, the USB device and the
hi-fi system. This type of damage will invali-
date your warranty.
8 «.
8 «.