HP 12500 Series Specification page 15

QuickSpecs
Configuration
PDU Cable ROW
C19 to C20 Jumper Cord
High Volt Power Entry Module to Wall Power Cord
NEMA L6-20P Cord (NA/MEX/JP/TW)
Configuration Rules:
Note 1 Supported on Switch JC654x, JF431x and JF430x only.
Note 2 Localization required on orders without #B2B, #B2C or #B2E options.
Note 3 When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the Defaulted Power Cable option on the
Power Electrical Module. (See Drop down remark in the "Internal Power Supplies" section.)
Note 4 #B2E is Offered only in NA, Mexico, Taiwan and Japan.
Remarks: Drop down under power supply should offer the following options and results:
Power Electrical Module to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C ROW.
(Watson Default B2B or B2C for Rack Level CTO)
Power Electrical Module to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level CTO)
High Volt Power Electrical Module to Wall Power Cord - #B2E Option. (Offered only in North America, Mexico,
Taiwan, and Japan)
Enter the following menu selections as integrated to the CTO Model X above if order is factory built.
Modules
Fabric Modules
12504 - System (std 0 // max 4) User Selection (min 4 // max 4) per Switch
12508 and 12518 System (std 0 // max 9) User Selection (min 8 // max 9) per Switch
HP 12508 Fabric Module
HP 12518 Fabric Module
DA - 13785 North America — Version 20 — January 16, 2014
HP 12500 Switch Series
JF426A #B2C
JF426A #B2E
JC067B
See Configuration
Note:1, 4
JC066A
See Configuration
Note:2, 4
Page 15