HP 12500 Series Specification page 11

QuickSpecs
Configuration
22U - Height Rack
HP 12508 DC Switch Chassis
2 - MPUx (Management Ports)
8- I/O module slots
9 - Fabric module slots
Must select min 1 Management Module
Must select min 3 Power Supply
1 PEM included
Must select Min 2 Fans
Must select Min 8 Fabric Modules
22U - Height Rack
HP 12518 AC Switch Chassis
2 - MPUx (Management Ports)
18 - I/O module slots
9 - Fabric module slots
Must select min 1 Management Module
Must select min 6 Power Supply
Must select min 2 PEM
Must select min 2 Fans
Must select Min 8 Fabric Modules
38U - Height Rack
HP 12518 AC Switch Chassis
2 - MPUx (Management Ports)
18 - I/O module slots
9 - Fabric module slots
Must select min 1 Management Module
Must select min 6 Power Supply
2 PEM included
Must select min 2 Fans
Must select Min 8 Fabric Modules
38U - Height Rack
Configuration Rules:
Note 1 If this Switch is selected at least one of these Power Suppies is required: (Use #0D1 if switch is CTO)
JF429A - HP 12500 2000W AC Power Supply
Note 2 When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the Defaulted Power Cable option on the
Power Electrical Module. (See Drop down remark in the "Internal Power Supplies" section.)
Note 3 If HP CTO Switch Chassis is selected to be Rack Level Integration, Then the CTO Switch Chassis needs to integrate
(with #0D1) to the BW966A or BW968A HP Universal Rack Only. (Default to the BW966A.)
Note 4 If this Switch is selected at least one of these Power Supplies is required: (Use #0D1 if switch is CTO)
JC651A - HP 12500 1800W DC Power Supply
DA - 13785 North America — Version 20 — January 16, 2014
HP 12500 Switch Series
JC652A
See Configuration
Note: 3, 4
JF430C
See Configuration
Note:1, 2, 3
JC653A
See Configuration
Note: 3, 4
Page 11