Technical Specifications - HP 700699-B21 Specification

QuickSpecs

Technical Specifications

General Specifications
Power and Environmental
Specifications
Network Processor
Data Rate
Bus Type
Form Factor
IEEE Compliance
Connector
Wiring
Cable Distance
NOTE: The HP 561FLR-T adapter can use existing UTP CAT6 (or better) cable to deliver Gigabit Ethernet
over copper, according to the IEEE 802.3an specifications. For new installations, CAT6a cable is
recommended. Cabling details:
CAT6 UTP or better twisted-pair
22-26 AWG, 100? @ 1 MHz
EIA/TIA 568-B.2-10b
Operating
Power
Agency approvals
RoHS Compliance
Safety
DA - 14613 North America — Version 1 — September 10, 2013
HP Ethernet 10Gb 2-port 561FLR-T Adapter
Intel X540 Controller
Two ports, each at 20 Gbps full duplex; 40 Gbps aggregate full duplex
theoretical bandwidth.
PCIe v2.1 (Gen 2) x 8
Standard and low profile adapter compliant with the PCIe standard
802.3, 802.3x, 802.3ad, 802.1Qaz, 802.1Qau, 802.1Qbb, 802.1ax
RJ-45 (Two)
CAT6 UTP or better twisted-pair
Maximum distances for CAT6 cable are 30 meters (98 feet).
Maximum distances for CAT6A (or better) are 100 meters (328 feet).
Temperature
Humidity
19.2W maximum
USA
Canada
Japan
International
Taiwan
Australia/New Zealand
(AS/NZS):
Korea
6 of 6
UL Mark (USA and Canada)
CE Mark
EN 60590
32° to 131° F (0° to 55° C)
5% to 95% non-condensing
FCC Part 15 Class A
ICES=003, Issue 4
VCCI V3 (2010.04) Class A
EN55022:2006 + A1:2007 Class A,
EN55024:1998+A1:2011+A2; EN61000-3-2:2006,
EN61000-3-3:2008
BSMI, CNS13438 (2006) Class A
EN55022:2006+A12007 class A
KN22 Class A, KN24
Page 10