Advertisement
QuickSpecs
Technical Specifications
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics Maximum heat
DA - 13032 Worldwide — Version 18 — November 11, 2013
2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-
T/100BASE-TX: half or full; 1000BASE-T: full only
2 open mini-GBIC (SFP) slots
Dimensions
Weight
Processor
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
100 Mb Latency
1000 Mb Latency
Throughput
Routing/Switching
capacity
Routing table size
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
Acoustic
dissipation
Voltage
Current
Maximum power rating
PoE power
Frequency
Notes
HP 2610 Switch Series
12.5(d) x 17.4(w) x 1.73(h) in. (31.75 x 44.2 x 4.39
cm) (1U height)
15.05 lb. (6.83 kg), Fully loaded
MIPS @ 300 MHz, 16 MB flash, 128 MB SDRAM;
packet buffer size: 1 MB
< 4.1 µs (LIFO)
< 2.9 µs (LIFO)
up to 9.5 million pps
12.8 Gbps
8000 entries
32°F to 122°F (0°C to 50°C)
15% to 95% @ 104°F (40°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 90% @ 149°F (65°C), noncondensing
up to 10,000 ft. (3 km)
Power: 64 dB, Pressure: 57 dB; DIN 45635T.19 per
ISO 7779
410 BTU/hr (432.55 kJ/hr), (switch-only BTU/hr:
410; combined switch + max. PoE devices at 15.4
W: 2281 BTU/hr)
100-127/200-240 VAC
7.0/3.5 A
77 W
406 W
50/60 Hz
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules
populated.
PoE Power is the power supplied by the internal
power supply, it is dependent on the type and
quantity of power supplies and may be
Page 14
Advertisement
