Advertisement
QuickSpecs
Technical Specifications
HP 2610-48 Switch
(J9088A)*
Ports
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics Achieved Miercom Certified Green Award
DA - 13032 Worldwide — Version 18 — November 11, 2013
48 autosensing 10/100 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX); Media Type: Auto-MDIX; Duplex: half or full
1 RJ-45 serial console port
2 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-
T/100BASE-TX: half or full; 1000BASE-T: full only
2 open mini-GBIC (SFP) slots
Dimensions
Weight
Processor
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only
100 Mb Latency
1000 Mb Latency
Throughput
Routing/Switching
capacity
Routing table size
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
Acoustic
* Products within this series have achieved sufficient scores in each of the
rated criteria to achieve the Miercom Certified Green distinction Award. See
the Specifications section of this series for more information.
Maximum heat
dissipation
Voltage
Current
Maximum power rating
Frequency
HP 2610 Switch Series
9.3(d) x 17.4(w) x 1.73(h) in. (23.62 x 44.2 x 4.39
cm) (1U height)
10.75 lb. (4.88 kg), Fully loaded
MIPS @ 300 MHz, 16 MB flash, 128 MB SDRAM;
packet buffer size: 2 MB
< 6.2 µs (LIFO)
< 4.4 µs (LIFO)
up to 13.0 million pps
17.6 Gbps
8000 entries
32°F to 122°F (0°C to 50°C)
15% to 95% @ 104°F (40°C), noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 90% @ 149°F (65°C), noncondensing
up to 10,000 ft. (3 km)
Power: 45 dB, Pressure: 36.2 dB; DIN 45635T.19
per ISO 7779
285 BTU/hr (300.67 kJ/hr)
100-127/200-240 VAC
1.3/0.8 A
66 W
50/60 Hz
Page 9
Advertisement
