Zanussi ZWC1301 User Manual page 8

At the end of the programme the selector
dial must be turned to position
switch the machine off.
Important! If you turn the programme selector
dial to another programme when the machine is
working, the lights in the programme progress
display will start to flash to indicate a wrong
selection. The machine will not perform the new
selected programme.
Select the spin speed, Rinse Hold or No
2
spin option ( )
Select the spin speed, Rinse Hold option or No
Spin option by turning the spin speed selector.
For the maximum spin speed allowed by each
programme, refer to the chapter Washing pro-
grammes.
• The position 1300 is equivalent to 900 rpm/
min for the synthetic and wool programmes
and 700 rpm/min for the delicate wash pro-
gramme.
• The position 500 is equivalent to 500 rpm/
min for the synthetic and wool programmes
and 450 rpm/min for the delicate wash pro-
gramme.
Select the desired option by means of
7 8
buttons , and
Depending on the programme, different func-
tions can be combined. These must be selec-
ted after choosing the desired programme and
before pressing the button
light will illuminate.
Quick
Daily
Time Prewash
If an incorrect option is selected, the corre-
sponding indicator lamp flashes for about 2
seconds. For the compatibility of the options
with the washing programmes, refer to the
chapter «Washing programmes».
8
to
9
6
. The relevant
8h
Extra Start Delay
Rinse Pause Start
Select the Delay Start by pressing button
5
Before you start the programme, if you wish to
delay the start, press the button
to select the desired delay. The corresponding
pilot light will light up.
8h 4h
Delay
2h
Start
Washing
End
Door
You must select this option after you have set
the programme and before you press button
Start Pause.
You can cancel or modify the delay time at any
moment, before you press button Start Pause.
Cancelling the delayed start after having press-
ed button Start Pause :
1. Set the washing machine to PAUSE by
pressing button Start Pause.
2. Press the button
light relevant to the selected delay goes
off.
3. Press button Start Pause again to start
the programme.
Important! The selected delay can be
changed only after selecting the washing
programme again.
The door will be locked throughout the delay
time (door locked light lit).
The Delay Start can not be selected with
DRAIN or SPIN programme.
Start the programme by pressing button
6
To start the selected programme, press this
button; the corresponding pilot light stops
flashing and remains lit.
On programme progress display the pilot lights
Washing and Door illuminate to indicate that
the appliance starts operating and the door is
locked.
5
repeatedly,
5
repeatedly until the
www.zanussi.com