Changing The Wash Cycle Options - Fisher & Paykel WL26CW1 Installation Instructions And User Manual

Changing the wash cycle options

22
Select the wash option you wish to modify, highlight it by touching the SELECT button.
1
START?
WARM
Scroll to the appropriate setting and press SELECT. This will highlight your choice to show you
2
that it has been selected.
CHOOSE
TEMP
COLDER
You will then be given the option whether to save this modified option for future washes or to
3
just use it for this one. If you select Save for Future Washes, the washer will save the changed
wash option for that cycle only. (Please note: This option is not available for the Delay Start, Drip
Dry or Soak selections).
Press SELECT to select.
4
You will then return to the main wash options screen.
5
Touch START/PAUSE or SELECT to begin the wash.
6
Note: If you wish to change any of the wash options while your AquaSmart™ is running please
press START/PAUSE then change the required option.
Auto Drain
Unsupervised clothes washers filled with water can present a drowning hazard to small children.
In order to minimize any risk of this type of accident, your AquaSmart™ has been
pre-programmed to know when this hazard is created, and drain the wash water to a safe level.
If you pause your AquaSmart™ at any time during the wash cycle when there is water in the tub,
the washer will activate the AUTO DRAIN function after 3 minutes. This will drain the water in the
wash tub to an acceptable level, removing any potential hazard.
A warning message will be displayed to warn you prior to AUTO DRAIN being activated.
Regular wash
SOFTENER FAST SPIN
WARM
WARMER