Table of Contents
Advertisement
first turn the programme selector to
sition. The programme is cancelled.
The programme can no longer be changed
directly once the programme has started. If
nevertheless there is an attempt to change the
programme on the programme knob or if an
function button (excluding the BUZZER but-
1)
ton
) is pressed, led on the START/PAUSE
button starts flashing temporarily in red. The
drying programme is not however affected by
this (laundry protection).
At the end of the programme
If the laundry is not removed at the end of the
cycle, the dryer performs an anticreasing phase
(duration: 30 minutes maximum).
If you do not remove the laundry, the dryer will
stop automatically at the end of the anticreasing
phase. Lights End/Anti-crease , Filter and
Cleaning and maintenance
Cleaning fluff filters
The filters collect all the fluff which accumulates
during drying. To ensure that the dryer works
perfectly, the fluff filters (fine filters and fluff fil-
ters) must be cleaned after each drying cycle.
Caution! Never operate the dryer without
fluff filters or with damaged or blocked fluff
filters.
1) Only dryers with buzzer button
12
Tank remain lit and the buzzer sounds for 2 mi-
OFF po-
nutes.
Turn the programme selector dial to
switch the machine off. Remove the laundry
from the drum and carefully check that the drum
is empty.
If you do not intend to carry out another wash,
close the water tap. Leave the door open to
prevent the formation of mildew and unpleasant
smells.
If you open and then close the door before
turning the selector dial to
corresponding to the phases making up the per-
formed programme come on.
After each use
• Clean the filters.
• Empty the water reservoir.
2
5
Clean the door seal
Wipe the door seal with a damp cloth immedi-
ately after the drying cycle has finished.
Emptying the water reservoir
Empty the water reservoir after every drying cy-
cle.
1
II
I
3
4
6
7
www.zanussi.com
to
all the lights
I
II
Hide quick links:
Advertisement
Table of Contents
