Operation; Mode Button; Hold Button - Pyle PDMT25 Operating Instructions Manual

OPERATION

To turn on the instrument turn the range knob from the
OFF position to any measurement range.
Note:
For best battery life ALWAYS turn the function switch
to the OFF position when the meter is not in use. This
meter has Auto OFF that automatically shuts the meter
OFF if 30 minutes elapse between uses.
NOTE: On some low AC and DC voltage ranges, with
the test leads not connected to a device, the display
may show a random, changing reading. This is normal
and is caused by the high-input sensitivity. The reading
will stabilize and give a proper measurement when
connected to a circuit.

MODE button

To select AC or DC measurement when in Voltages,
,℃ or ℉ranges.
Amps, mA , uA ,Ω, , )))

HOLD button

The HOLD function allows the meter to "freeze" a
6