Pyle PDMT25 Operating Instructions Manual page 2

SAFETY WARNINGS
The following safety information must be observed to insure
maximum personal safety during the operation at this meter:

Measurements beyond the maximum selected
range must not be attempted.

Extreme care must be taken when measuring
above 50 V, especially on live bus-bars.

To measure voltage, the instrument must not be
switched to a current or resistance range, or to the
diode check or buzzer position.

Circuits must be de-energised and isolated before
carrying out resistance tests.

The rotary selector switch must only be turned
after removing test connections.

All external voltages must be disconnected from
the instrument before removing the battery.

Test leads and prods must be in good order, clean,
and with no broken or cracked insulation.

UK Safety Authorities recommend the use of fused
test leads when measuring voltage on high energy
systems.
2