Battery Installation - Pyle PDMT25 Operating Instructions Manual

WARNING: To avoid electric shock, do not operate
your meter with the battery cover removed.

BATTERY INSTALLATION

WARNING: To avoid electric shock, disconnect the
test leads from any source of voltage before
removing the battery cover.
Do not operate the instrument with the battery cover
removed
1. Disconnect the test leads from the meter.
2. Open the battery cover by loosening the screw
using a Phillips head screwdriver.
3. Insert the battery into battery holder, observing the
correct polarity.
4. Put the battery cover back in place. Secure with the
two screws.
NOTE: If your meter does not work properly, check the
fuses and battery to make sure that they are still good
and that they are properly inserted.
26