Niles ZR-6 Installation Manual page 9

SYSTEM PARTS GUIDE
ZR-6 MULTIZONE RECEIVER REAR PANEL
18
17
30
36
17) AM/FM ANTENNA CONNECTIONS
18) PAGING INPUT
19) VIDEO SYNC INPUTS
20) RS-232 PORT
can be monitored and controlled by an external control system.
21) VOLTAGE SYNC INPUTS
trigger voltage between 3V and 30V, AC or DC.
22) KEYPAD PORTS
23) EXPANSION PORTS
Receivers using CAT-5 cable.
24) MICROFLASHER
(FG01019) to control the source devices.
25) HIGH OUTPUT FLASHER
(FG01023) to control multiple devices from a single fl asher.
26) GLOBAL 12V TRIGGER OUTPUT
power turn-on and turn-off of connected devices such as a Niles AC-3 Voltage-triggered AC Power Strip (FG00242).
NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373
19 20 21 22
35 34 33
— For connecting the supplied AM and FM antennas.
— Connects to a compatible telephone system, intercom system and/or a doorbell (see
— Determines on/off status of connected video device by detecting presence of a video signal.
— A 3.5 mm stereo mini-jack is used to provide RS-232 serial communication so the ZR-6 MultiZone Receiver
— Determine the on/off status of connected source devices by detecting the presence of a
— Six zone-specifi c RJ-45 jacks are used to connect the keypads with CAT-5 cable.
— Two RJ-45 jacks are used to connect the Master MultiZone Receiver to the Slave MultiZone
OUTPUTS
®
— Five 3.5 mm stereo mini-jacks are used to connect the optional Niles MicroFlashers
— A single 3.5 mm mini-jack is used to connect an optional Niles IRB1 High Output IR Flasher
— A single 3.5 mm mini-jack is used to provide a 12V DC trigger to automate the
26 27 28
23 24
25
L L L L+ L + L L L L+ L- R- R+ L + L + L + L + L L L L L L L L L L R R R R R R R R R R R R R R+ R R R+ R R R R R R+ R R
L + L+ L L+ + + L L- L- R- R- R R R R R R+
32
29
30
31
FIGURE 10 ).
7