Niles ZR-6 Installation Manual page 8

SYSTEM PARTS GUIDE
ZR-6 MULTIZONE RECEIVER PROGRAMMING PANEL
7 8
16
7) IR RECEIVER
— Receives the IR codes from hand-held remotes during programming.
8) PROGRAM BUTTON
9) PREVIOUS AND NEXT BUTTONS
10) TEST IR BUTTON
11) ERASE BUTTON
12) SEQUENCE INSERT (LIBRARY 1)
13) SEQUENCE INSERT (VS-6/LIBRARY 2)
or additional stored IR commands from Library 2 into sequences to control source devices.
14) ARCHIVE/UPDATE PORT
and or updating the fi rmware of the ZR-6 MultiZone Receiver and connected keypads.
15) PROGRAMMING SLIDE SWITCH
archiving, setup, and fi rmware updates.
16) IR STATUS LED
6
10
9 11
— Enters and exits ZR-6 MultiZone Receiver IR programming and editing mode.
— Step forward and backward through each part of the programming process.
— Transmits the last-learned IR code out of its respective IR output to verify correct operation.
— Erases various parts of the ZR-6 MultiZone Receiver memory.
— Inserts the stored IR commands from Library 1 into sequences to control source devices.
— Inserts pre-loaded VS-6 High Defi nition Video Switcher IR commands and/
— Used to connect a computer for archiving and restoring previously saved ZR-6 confi gurations
— Disables the rear RS-232 connection and activates the front RS-232 connection for
— Indicates reception of IR codes by the ZR-6 MultiZone Receiver.
12 13
15
NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373
14