Niles ZR-6 Installation Manual page 10

SYSTEM PARTS GUIDE
ZR-6 MULTIZONE RECEIVER REAR PANEL
27) ZONE FOUR, FIVE, AND SIX 12V TRIGGER OUTPUTS
to automate the power turn-on and turn-off of zone-specifi c connected devices such as Niles Systems Integration Amplifi ers.
28) GLOBAL IR INPUT
control system such as the Niles iC2
29) HT (HOME THEATER) SYNC INPUT
theater system to let the ZR-6 MultiZone Receiver know when the home theater is on.
30) RACK MOUNT EARS
Receiver into a professional rack.
31) IEC POWER CABLE CONNECTOR
32) LOUDSPEAKER TERMINALS
14 AWG.
33) ZONE FOUR, FIVE, AND SIX PREAMPLIFIER OUTPUTS
external power amplifi ers. Can be switched between fi xed or variable output.
34) SOURCE AUDIO INPUTS
35) SOURCE 2 AUDIO INPUT/iPod CASCADE AUDIO OUTPUT
analog input for a Source 2 external device when an iPod is not being used with the system. With an iPod, these jacks become
cascade audio outputs to route the iPod's audio signal to a Slave ZR-6 MultiZone Receiver.
36) iPod CONNECTOR
8
— A single 3.5 mm mini-jack is used to provide an input connection for IR commands from an external
™ Home Theater Automation System (FG01342).
— A single 3.5 mm mini-jack is used to detect voltage from a connected home
— Two metal rack-mount ears are included and can be attached for installing the ZR-6 MultiZone
— Two-pin connector for the removable power cord.
— A removable terminal is provided for each of the six zones. Accepts speaker wire up to
— Four pairs of stereo RCA jacks are used to connect stereo audio to Sources 3-6.
— A 30-pin connector is used to provide a connection for an iPod digital music player as Source 2.
(CONTINUED)
— Three 3.5 mm mini-jacks are used to provide a 12V DC trigger
— Three pairs of stereo RCA jacks are used to connect
— A pair of stereo RCA jacks are used to provide an
NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 305-238-4373